Voice Fax
User Manual
●
Note: The fax data transmition is divided into two stages. Voice Fax
receives fax data into internal memory and after reception is succsessfull it
transmits data to localy connected or remote fax device.
●
If device fails to transmit data it automaticly makes up to (default) three
redials with (default) 30 second delays and if it fails, by default Voice Fax deletes
fax data from internal FLASH memory.
●
This function can be switched off so after unsuccessful number of tries fax
data will stay in nmemory and will be possible to retry fax transmition by picking
up handset and pressing # # # later or even after Voice Fax restart.
●
It is possible that after succsessfull tranmition fax will print 3 same pages.
This means that after fax page there was no confirmation and device
automaticaly retried current page.
●
If option „Delete after tries“ is switched off, unsuccessfull tranmition is
indicated by LED's. To delete fax data from FLASH memory pick up the handset
and press * * * alternatively every next fax session will overwrite previous fax
data in the FLASH.
●
If it is not possible to send or receive fax few times in a row it might be
because of GSM network problems, please wait few minutes and try again.
●
If device not responding please restart device by pressing reset buton on the
back side of the enclosure.
●
If by mistake wrong destination fax number is entered and Voice Fax have
started dialing press *** to stop transmition. If *** will be pressed at the moment
of dialing or at the pause between tries, calling will be terminated and data
deleted from flash immediately. If *** will be pressed at the moment when device
is connecting, sending, calling will be terminated and data deleted from flash
after unsuccessful attemp will be finished.
16
