Teltonika RUT950, Руководство пользователя

Страница: 56 / 155

56
7.2.2.2.1 Static
Field name Sample value Explanation
1. Disable NAT On/Off Toggle NAT on and off.
2 Override MAC address 86:48:71:B7:E9:E4 Override MAC address of the WAN interface. If your ISP gives you
a static IP address it might also bind it to your computers MAC
address (i.e. that IP will only work with your computer). In this
field you can enter your computers MAC address and fool the
gateway in thinking that it is communicating with your computer.
3. Override MTU 1500 Maximum Transmission Unit – specifies the largest possible size
of a data packet.
4. Use gateway metric 0 The WAN configuration by default generates a routing table
entry. With this field you can alter the metric of that entry.
7.2.2.2.2 DHCP
Field name Sample value Explanation
1. Disable NAT Enable/Disable If checked, router will not perform NAT (masquerade) on this
interface
2 Use broadcast flag Enable/Disable Required for certain ISPs, e.g. Charter with DOCSIS 3
3. Use default gateway Enable/Disable If unchecked, no default route is configured
4. Use DNS server
advertised by peer
Enable/Disable If unchecked, the advertised DNS server addresses are ignored
5. User gateway metric 0 The WAN configuration by default generates a routing table entry
With this field you can alter the metric of that entry
6. Client ID to send when Specify client ID which will be sent when requesting DHCP