Teltonika RUT230, Быстрый старт

Страница: 4 / 6

1. To enter the router's Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.
2 . Use login information shown in image A when prompted for authentication.
3. After you login, you will be prompted to change your password for security reasons. The new password must
contain at least 8 characters, including at least one uppercase letter, one lowercase letter and one digit. This step is
mandatory and you will not be able to interact with the router's WebUI before you change the password.
4. When you change the router's password, the Configuration Wizard will start. The Configuration Wizard is a tool
used to setup some of the router's main operating parameters.
5. Go to Overview page and pay attention to the Signal Strength indication (image B). To maximize the cellular
performance try adjusting the antennas or changing the location of your device to achieve the best signal
conditions.
LOGIN TO DEVICE
TECHNICAL INFORMATION
*Order code dependent.
**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
Radio specifications
Bundled accessories specifications*
RF technologies
Max RF power
2G, 3G, WiFi
33 dBm@GSM, 24 dBm@WCDMA, 20 dBm@ WiFi
Mobile antenna 698~960/1710~2690 MHz, 50 Ω, VSWR<3, gain** 3 dBi, omnidirectional, SMA male connector
Power adapter Input: 0.4A@100-240VAC, Output: 9VDC, 1A, 4-pin plug
WiFi antenna 2400~2483.5 MHz, 50 Ω, VSWR<2, gain** 5 dBi, omnidirectional, RP-SMA male connector
-65 dBm
Data connection state
SIM card slot in use
Bytes received/sent *
State
Registered (home); OPERATOR; 3G
Connected
348.7 KB / 223.5 KB
Ready