14
Safety information
This message contains information on how to operate FMM130 safely. By
following these requirements and recommendations, you will avoid
dangerous situations. You must read these instructions carefully and follow
them strictly before operating the device!
•
The device uses SELV limited power source. The nominal voltage is +12 V
DC. The allowed voltage range is +10..+30 V DC.
•
To avoid mechanical damage, it is advised to transport the device in an
impact-proof package. Before usage, the device should be placed so that
its LED indicators are visible. They show the status of device operation.
•
When connecting the 2x6 connector wires to the vehicle, the appropriate
jumpers of the vehicle power supply should be disconnected.
•
Before unmounting the device from the vehicle, the 2x6 connector must
be disconnected. The device is designed to be mounted in a zone of
limited access, which is inaccessible to the operator. All related devices
must meet the requirements of EN 60950-1 standard.
The device FMM130 is not designed as a navigational device for boats.
Do not disassemble the device. If the device is damaged,
the power supply cables are not isolated or the isolation
is damaged, DO NOT touch the device before unplugging
the power supply.
All wireless data transferring devices produce interference
that may affect other devices which are placed nearby.
The device must be connected only by qualified
personnel.
The device must be firmly fastened in a predefined
location.
The programming must be performed using a PC with
autonomic power supply.
Installation and/or handling during a lightning storm is
prohibited.
The device is susceptible to water and humidity.
Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the
instructions.
Battery should not be disposed of with general household
waste. Bring damaged or worn-out batteries to your local
recycling center or dispose them to battery recycle bin
found in stores.
