Teltonika FMM003, Быстрое руководство

Страница: 6 / 18

Quick Manual v1.7 // FMM003 6
Telematics
PC CONNECTION (WINDOWS)
HOW TO INSTALL USB DRIVERS (WINDOWS)
1. Please download COM port drivers from here
1
.
2. Extract and run TeltonikaCOMDriver.exe .
3. Click Next in driver installation window.
4. In the following window click Install button.
5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
setup.
1
teltonika-gps.com/downloads/en/fmb120/TeltonikaCOMDriver.zip
1. Power-up FMM003 with DC voltage (10 – 30 V) power supply using supplied power cable . LED’s should start blinking, see
“ LED indications
1
” .
2. Connect device to computer using Micro-USB cable or Bluetooth connection:
• Using Micro-USB cable
• You will need to install USB drivers, see “ How to install USB drivers (Windows)
2
”
• Using Bluetooth
• FMM003 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device
> Bluetooth. Choose your device named – “FMM003_last_7_imei_digits” , without LE in the end. Enter default password
5555 , press Connect and then select Done .
3. You are now ready to use the device on your computer.
1
wiki.teltonika-gps.com/view/FMM003_LED_status
2
Page 6, "How to install USB drivers"