Teltonika FMB630, Руководство пользователя

Страница: 72 / 173

72
Parameter ID Possible Parameter Value Default Value
Bluetooth Name
165
String
Bluetooth DINx call trigger
170-
173
0/1 (0 – disable, 1 – enable) 0
Bluetooth DINx call trigger
number index
166-
169
0 – 9 (numbers from predifined list) 0
7 PROFILE SWITCHING
FMB630 has 4 profiles saved in Flash memory of the module. Every profile has a list of
parameters, which enables FMB630 to operate in different modes while using different profiles.
The easiest way to understand what is a profile is to compare it to a list of instructions that are
written for different cases. You are allowed to setup up to 4 different module behaviours. Global
parameters and external devices contain settings that are common for all 4 profiles. This means
that if you set FMB630 to call to a predefined number, you will be able to call it while using any
profile. Basic scheme of Global parameters, external devices and profiles is shown below.
According to the scheme, every profile has a list of parameters. Global parameters and external
devices are common for all profiles. (Figure 44)
Figure 44 FMB630 profile structure
Switching between profiles (changing behaviour) can be performed by Profile switch
depending on GSM operator code (mostly used for roaming applications), or by Profile switch
depending on I/O event (on I/O value changing).
Profile 3 is default profile for FMB630. It is always loaded on the very first start-up and further
profile switching is proceeded after operator scan or I/O element changes (although device
remembers which profile it used after that).
7.1 Profile Switching dependence on GSM Operator
GSM Operator code profile switching is mostly used in roaming applications, when the
purpose is to have information from module both from Home and Roaming operator network for