Teltonika FM6320, Руководство пользователя, Страница: 102 / 139

102
o
Hysteresis – record is generated when increasing parameter value becomes higher
than High value, and decreasing becomes less than Low value
o
Event on exit – record is generated when parameter value becomes higher than
High value or lower than Low value;
o
Event on entrance – record is generated when parameter value becomes between
High and Low values;
o
Event on both – record is generated when parameter value crosses High or Low
values;

Low – allows to choose low value for Data acquisition;

High – allows to choose High level for Data acquisition;
13.4.2 CAN monitoring
To start CAN bus monitoring mark Monitoring check box. Table of available CAN
messages will appear (Fig. 61). Data from CAN bus will be updated every 3 seconds. In order to
see only desired data open “Monitoring filters” menu (Figure ).
Figure 61 CAN data table
Figure 62 Monitoring filters