87
Field name
Explanation
1.
Enable
Check box to enable IPSec.
2.
Mode
Select “Main”, “Aggressive” or "Base" mode accordingly to your IPSec server
configuration.
3.
Enable NAT traversal
Enable this function if client-to-client applications will be used.
4.
Enable initial contact
Enable this to send an INITIAL-CONTACT message.
5.
My identifier type
Set the device identifier for IPSec tunnel. E.g. You can use your IP address
6.
My identifier
Set the device identifier for IPSec tunnel.
In case RUT has Private IP, its identifier should be its own LAN network
address. In this way, the RoadWarrior approach is possible.
7.
Preshare key
Specify the authentication secret [string]. Secret’s length depends on
selected algorithm, eg. 128 bit long secret is 16 characters in length, 128 bits
/ 8 bits (one character) = 16.
8.
Remote VPN endpoint
Set remote IPSec server IP address.
9. Enable DPD
If the RUT does not receive DPD-ACK message from its IPSec peer, RUT shuts
the connection down.
10. Delay (sec)
Select delay between peer acknowledgement requests
Содержание RUT950
