manualshive.com logo in svg

Teltone TLS-5A, Руководство пользователя

Поделиться
Скачать
Teltone TLS-5A Скачать руководство пользователя страница 57

This feature is activated from the line making the call and must be
programmed on

each

line that makes calls in hunt mode.

Program the lines between which you want to hunt with the same number,
either first or second.

Note:

All numbers in a hunt group must be programmed in the same number

type: they must all be first or second numbers.

For example: To set up a hunt group consisting of Lines 3 and 4, enter *03# to
select Line 3. (In this example

“

789

”

is the number being dialed.)

*12# 789#, second number is 789

*04#, select Line 4

*12# 789#, second number is 789

Note:

If you pick up one of the phones in the hunt group and place a call to

the hunt group number, the next higher line will ring. If you pick up the
phone on Line 3 from the hunt group in the above example and call 789,
Line 4 will ring.

·

To disable hunt mode so that the TLS-5 will only attempt to ring the first
line that has this number, enter:

*

35#0#

·

To cause the TLS-5 to ring simultaneously all lines programmed with this
number. The first line to answer will be connected; all others will revert to
normal operation

(default)

, enter:

*

35#1#

Note:

Caller ID, command 50, must be disabled on all four lines for this

option to work. If Caller ID is not disabled, this setting responds like

*

35#2#

.

·

To cause the TLS-5 to ring the

first available line

that has this number,

starting from Line 1, enter:

*

35#2#

·

To cause the TLS-5 to ring the

next available line

that has this number; that

is, the next higher line number after the last one used (if Line 2 was the last
line rung, Line 3 will be rung), enter:

*

35#3#

Note:

For Caller ID to be sent correctly, lines in a hunt group must be

programmed with the same ring cadence.

Chapter 6: Programming

40-400-00003, Rev. 

E

 Page 51

Содержание TLS-5A













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды