INSTALLING ADSL
FILTER/SPLITTER
FOR A STANDARD PHONE SOCKET
1. Connect filter/splitter to phone
• Disconnect the phone cable from the wall socket and connect it
into the socket labelled ‘Local Phone’ on the filter/splitter.
2. Connect filter/splitter to wall socket
• Connect the short cable from the socket labelled ‘Wall Socket’
on the filter/splitter to the wall socket.
Step 1
Step 2
3. Ensure phone line is connected
• After you have installed the filter/splitter, we recommend that you test the phone to
make sure it works the same way as it did before the installation.
• To test your phone connection check if you have a dial tone and that there is no
interference on your phone line.
• If you don’t have a dial tone or there is interference on the line, please review and
repeat the steps above. If your router will be sharing the same socket as the phone,
you can plug it into the socket on the filter/splitter marked ‘ADSL Modem’ when the
Install CD asks you to. Otherwise, just leave this socket empty.
9 10
