10
Getting started
2. To fit the NiMH battery into the handset, slide
out the battery compartment cover. Place
the supplied rechargeable battery pack in
the battery compartment, with the battery
connector plugged in, as shown. Slide the
battery compartment cover back.
3. Place the handset on the base to charge for
at least 24 hours. When the handset is fully
charged the will be displayed.
The Charging LED lighting up indicates that the
handset is properly placed on the base.
4. When the battery is fully charged, plug one
end of the telephone line cord into the base
station and the other end into the telephone
wall socket.
WARNING
Do not place your Telstra Slim Touch 9650 in the
bathroom or other humid areas.
IMPORTANT
The base station must be plugged into the
mains power socket at all times. Do not connect
the telephone line until the handset is fully
charged. Only use the power adaptor, telephone
cables and NiMH battery pack supplied with the
product.
Battery low warning
If the flashes in the handset display you will
need to recharge the handset before you can use
it again.
