Telstra MF65 User Manual v1.0 Page 29 of 30
outside. In such cases there could be condensing moisture inside the
device which can cause internal damage. Unplug the device and leave it
for 30 minutes before use.
•
Always handle the device with care. Be careful not to drop or bend the
device.
•
There are no user serviceable parts inside the device. Unauthorised
dismantling or repair will void the warranty.
RF SAFETY INFORMATION
The wireless device has an internal antenna. For optimum performance
with minimum power consumption do not shield the device or cover with
any object.
Covering the antenna affects signal quality and may cause the device to
operate at a higher power level than needed.
RADIO FREQUENCY ENERGY
The wireless device is a low-power radio transmitter and receiver.
When switched on it intermittently transmits radio frequency (RF) energy
(radio waves).
The transmit power level is optimized for best performance and
automatically reduces when there is good quality reception.
Maximum power is only used at the edge of network coverage so under
most circumstances the power output is very low.
Under poor network conditions the device transmits at a higher power
level and may get hot.
SPECIFIC ABSORPTION RATE (SAR)
The wireless device is designed to be used in close proximity to the body.
We declare that the product detailed in this manual, and in combination
with our accessories, conforms with the essential requirements of The
Radio Communications Standard (Electromagnetic Radiation Human
Exposure) 2003 and the Australian Communications and Media Authority
Section 376 of the Telecommunications Act 1997 when used at a distance
of not less than 10mm from the body. The worst case SAR result is
1.44W/Kg
