16. Register and De-Register a DECT Handset
Can only register DECT CAT-iq2.0 handset. DECT 6 handsets will not register.
Press the Pair button on the front panel between the Power and Wi-Fi buttons for at least five seconds.
The button will starts flashing blue. The button will flash blue for 3 minutes.
While button is flashing the gateway is ready to pair with the handset.
Follow the handset’s documentation for pairing the handset. (Default Pin is 0000)
When the handset is paired the Pair light will turn green,
Can also pair handset and change pin from within GUI (Advanced > Telephony > DECT)
To register or pair a handset click on “Pairing Handset” Start
To page a handset press pair button on front of gateway for less than 2 seconds. To stop paging press pair
button again.
To de-register (un-pair) a handset log into the gateway and go to Advanced > Telephony > DECT.
Scroll down to bottom of page
Select handset from drop down list and click on “Unregister”
The handset is de-registered.
