manualshive.com logo in svg

Telstra Access 200, Руководство пользователя

Поделиться
Скачать
Telstra Access 200 Скачать руководство пользователя страница 42

4 2

2. Press [

‚

] or [



] to browse through your

Callers List.
If you read a new entry it is assumed to be seen

and the Unseen Counter decrements by one.

3. Press [

‚

 to exit or [OK] to dial the number.

Moving a Caller Entry:

You can transfer an entry from the Callers List into

the Directory the Screening List or any of the

Quick-Dial memories. This allows you to keep the

entry for as long as you like.

1 Press [CALLERS]

2. Press [

‚

] or [



] to go to the entry you want.

3. Press [ENTER]

The display shows the message ‘MOVE TO ?’

4. Press [DIRECTORY], [SCREENING], [M1],

[M2], [M3], or [M4].
If the chosen destination is full the move

request is cancelled. Choose another destination

or exit the Callers List and delete any unwanted

entries from the destination list.

5. Modify the name and number (if necessary)

and assign a melody.

The caller entry is deleted from the Callers List

and saved in the specified destination. The

display returns to the next entry.

OK

DIAL

SCREENING

USING CALLER DISPLAY

ENTER

NOTEPAD

CALLERS

DIRECTORY

a200ug.p65

3/7/01, 11:11 AM

42

Содержание Access 200

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды