Telstar TBL900210MD, Инструкция по эксплуатации

Страница: 13 / 16

13
BLENDER
TBL900210MD
CAUTION
Make sure that the motor base is unplugged from the power source before inserting
or removing any attachment and before cleaning.
DO NOT immerse the motor base into water or any other liquid.
1. Separate/remove all parts from each other.
2. Clean the motor base with a damp cloth and wipe dry.
3. Place jars in the dishwasher. Place the lids and attachments on the top rack.Use
caution when handling the blade assemblies as the blades are very sharp.
CLEANING
Note:
You may also wash the jars by filling the jar to the Max fill line with warm water and a drop of dish washing
detergent, placing the blade assembly on the jar and pulsing a few times. Do not fill the jar more than Max
fill line with water because it will overflow. Once clean, remove the jar from the motor base. Rinse the jar,
attachment and lid under running water. Allow all the parts to dry before storing.
Any other servicing should be performed by an authorized service representative.
Maintaining
Secure the power cord underneath the base by wrapping the cord around the cord wrap. Do not place
anything on top. Store the jars and the rest of the attachments along side the appliance where they will not
be damaged and won’t cause a hazard.
RESETTING THE MOTOR THERMOSTAT:
Blender designed a unique safety system which prevents damage to the unit’s motor and drive system should
you inadvertently overload your appliance. If the appliance is being overloaded, the motor will stop. To reset
the appliance, follow the resetting procedure below: