SPECIAL FUNCTIONS
Refrigerant Leakage Detection ,
With this new technology, the display area will appear EC or the indication lamps will
continue flashing when the outdoor unit detects refrigerant leakage.
Louver Angle Memory Function (optional):
Within the scope of safety angle, it will memorize the open angle of horizontal louver.
If it exceeds, it will memorize the boundry of safety angle. In the following
circumstances, it will return to standard angle: 1) pressing the manual switch, 2) unplug and
then plug in the machine. So we strongly suggest that the open angle of the horizontal louver
should not be set too small, in case the condensed water forms and drops from the horizontal
louver.
SELF CLEAN FUNTION(Optional)
Function used after the Shut Down of cooling operation to clean the Evaporator and keep it as
fresh for the next operation.
The unit will operate as following sequence: FAN ONLY mode at Low fan speed--Heating
operation with LOW fan speed (applicable to cooling & heating modles (only) FAN ONLY
operation--Stop Operation---Turn off.
Note:
This function is only available under COOL (AUTO COOL, FORCED COOL) and DRY mode.
Before select the function, it is recommended to run the air conditioner under Cooling
operation for about half an hour. Once the Self Clean function is activated, all TIMER
setting will be cancelled.
During Self Clean operation, when press the SELF CLEAN button on the remote controller
again will stop the operation and turn off the unit automatically.
CLEAN AIR function (on some models)
Improving the quality of indoor air is one of the purposes of an air conditioner. This air
conditioner is equipped with ionizer or Plasma Dust Collector (Depending on specific configu-
ration of the model). With the anions generated by Ionizer, the air circulation
of the air conditioner fills the room with refreshing, natural and healthy air. The Plasma Dust
Collector generates a high voltage ionization zone, through which the air is converted to
plasma. Inside the air most of the dust, smoke, and pollen particles are captured by the
electrostatic filter.
-Anti-mildew function (Optional)
When turns off the unit on COOL, DRY, AUTO (Cool) mode, the air conditioner will continue
operating for about 7-10 minutes (depending on models) at LOW fan speed. If turns off on
HEAT mode, the unit will continue operating for about 30 seconds at LOW fan speed. This will
help to dry up the condensed water inside the evaporator, and prevent the breeding of mildew.
Under Anti-mildew operation, do not restart the air conditioner until the unit is completely off.
A/C
TAS012112MD
Содержание TAS012112MD
Страница 1: ...Aire Acondicionado TAS012112MD...
Страница 32: ......