Telstar Electronics SkyWave DX600, Инструкция по сборке

Страница: 15 / 57

RF Linear Amplifier PCB Assembly Manual
SkyWave DX600 Revision-B
Last Revised - 2/5/2021 9:10 AM
Page 15 of 57
www.telstar-electronics.com
Step #5 – Dual Operational Amplifier (U2)
IMPORTANT – INTEGRATED CIRCUITS ARE POLARIZED AND MUST BE INSTALLED IN THE
PROPER ORIENTATION. USE THE OUTLINE ON THE PCB AS A GUIDE TO INSTALL
THE INTEGRATED CIRCUIT WITH THE NOTCHED SIDE AS SHOWN.
Insert U2 into the PCB at the designated location.
(Figure 11)
Solder U2 into position.
Cut off the excess lead length.
Figure 11