SECTION 5 |
28
STREAMING
Configuring Zephyr iPort PLUS for Streaming
Go to the
Codec Configuration
page. For each stream:
1. Enter the Livewire channel number you want to use as your source.
2. Enter the Livewire text name.
3. Enter the stream server IP number and port (the port must correspond to that set in the server’s configura-
tion).
Press the
Options
button to access the codec detail configuration.
4. Enter the encoder type, bitrate, and other parameters.
5. Select ‘TCP’ as the protocol (used for the iPort to server link).
6. Click the box
Enable SHOUTcast protocol,
and enter a password that will be used by the server to authenti-
cate the stream.
7. Install, configure, and start the server.
