Press and hold the key next to
Setup
for 3 full seconds and
then release. No visible change will occur while long-
holding this button. However, the long-press is needed,
or the
Setup
options will be disabled on the next screen.
Enter the IP address and netmask values
that you wish to assign to the phone.
When the IP address is entered, press the
“Enter” softkey to save the entry.
Press the
Menu key to exit and save settings.
Connect to the Gateway device
Press the
Menu key and fi nd the
Engine Setup
option.
Press and hold the key next to
Engine Setup
for 3 full
seconds and then release. No visible change will occur
while long-holding this button. However, the long-press
is needed, or the
Engine Setup
options will be disabled on
the next screen.
Press the
VX Engine List
button to select from the list of VX
Engines installed on your network, or manually key the IP
address of the VX Gateway, or other Telos phone system
you wish to connect with, into the
Engine IP
address box.
Press the “Enter” softkey to save the
entered IP.
Press the
Menu key to exit and save settings.
Select Show
Select the correct Show from the VX Gateway or other
Telos phone system. The VSet will automatically connect
to your telephone system.
If additional assistance is required, please contact Telos
Alliance Customer Support by visiting http://telosalliance.
com/contact or c1.216.241.7225.
p/n 1490-00071-001
v2.0 Rev 6/2013 • Specifi cations subject to change without notice
