Telos Hx1 Скачать руководство пользователя страница 5

Страница: 5 / 8

DIP SWITCH CONFIGURATION

1. NOTE: If you are using the Hx1 or Hx2 outside of the United States of America, please refer to the "Country

Specific Configuration Settings" Section in the manual for instructions and tables for setting the internal

DIP SWITCHES to the proper Telco Country setting.

2. On the rear panel of the Hx1 and Hx2 hybrid are two banks of DIP switches (I) labeled SETTINGS and

OPTIONS. The SETTINGS bank of DIP switches (SW1 & SW2) allows you to control the operational levels of

various signal processing stages of the hybrid unit.

3. The illustration (I) depicts the factory default setting for the Hx1 and Hx2. Please refer to the product

manual for full descriptions of settings and functions.

4. If no special settings are required, make sure DIP switches are in the default position.

REAR PANEL DIP SWITCH CONTROL

CONTINUE TO TEST YOUR CONNECTION

The Hx1 / Hx2 is configured and ready to make or receive

calls. Continue to the “Test Your Connection” instructions.

INSTALLATION HELP

For more details on other configuration options, or for additional

information about configuring an Hx1 or Hx2, please access the full

manual online at https://www.telosalliance.com/Telos/HX.

If you have more questions, call the Telos Alliance 24/7 Support Team at

+1 (216) 622-0247, or email us at [email protected], we’d be

happy to help you out.

Содержание Hx1








