Telos Alliance Omnia 2001-00522-000 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 66

background image

V1.1-OCTOBER 2019 |

VII

OMNIA MPX NODE MANUAL

User Warnings and Cautions

The installation and service instructions in this manual are for use by qualified personnel
only. To avoid electric shock, do not perform any servicing other than that contained in
the operating instructions unless you are qualified to do so. Refer all servicing to qualified
personnel.

This instrument has an autoranging line voltage input. Ensure the power voltage is within
the specified range of 100-240VAC. The ~ symbol, if used, indicates an alternating current
supply.

This symbol, wherever it appears, alerts you to the presence of uninsulated, dangerous
voltage inside the enclosure – voltage which may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance
instructions. Read the manual.

CAUTION: HAZARDOUS VOLTAGES

The instrument power supply may incorporate an internal fuse. Hazardous voltages may
still be present on some of the primary parts even when the fuse has blown. If fuse replace-
ment is required, replace fuse only with same type and value for continued protection
against fire.

WARNING:

The product’s power cord is the primary disconnect device. The socket outlet should be
located near the device and easily accessible. The unit should not be located such that
access to the power cord is impaired. If the unit is incorporated into an equipment rack,
an easily accessible safety disconnect device should be included in the rack design.

To reduce the risk of electrical shock, do not expose this product to rain or moisture. This
unit is for indoor use only.

This equipment requires the free flow of air for adequate cooling. Do not block the venti-
lation openings on the rear and sides of the unit. Failure to allow proper ventilation could
damage the unit or create a fire hazard. Do not place the units on a carpet, bedding, or
other materials that could interfere with any panel ventilation openings.

If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.

«
...
5
6
7
8
9
...
»

Содержание Omnia 2001-00522-000



































































Отзывы:

Нет отзывов

Похожие инструкции для Omnia 2001-00522-000

Бренд: Thinkpower Страницы: 30

Бренд: Magnimage Страницы: 40

Бренд: Rayleigh Instruments Страницы: 27

Бренд: Racal Instruments Страницы: 12

Бренд: Lawmate Страницы: 34

Бренд: MPP Solar Страницы: 4

Бренд: Balluff Страницы: 2

Бренд: LogicLadder Страницы: 55

HYT-10.0HV-EUG1

Бренд: Hoymiles Страницы: 34

Welbee WB-A350P

Бренд: Daihen Страницы: 150

Бренд: Hagstrom Страницы: 32

Бренд: Vanner Страницы: 4

Бренд: Cobra Страницы: 12

Бренд: Kiloview Страницы: 9

Бренд: DAB Страницы: 600

Бренд: Srne Страницы: 35

Бренд: MicroE Systems Страницы: 14

EQUINOX BATT EQX2 BATT

Бренд: Salicru Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды