Display 2
No additional stored messages
Press either FN or DN key to return to main screen
Press UP to go back through stored messages
(Also, see Message Export and Message Delete on Menu Level I Screen.)
Menu Level 1 Screen
From the Main Screen, pressing the FN key will display the Menu Level 1 screen. This screen allows
the user to adjust operational parameters of the TSUR-400 receiver. These operational parameters
include volume of the audio, Diagnostics mode, Data split mode, Update mode, Beep mode, RF Power
Mode, Edit 28 ID’s Table, Audio mode, ID filter, message export, stored message delete and access to
Setup Menu Level 2. The UP and DN keys are used to highlight the desired feature. (Highlighting is
accomplished by alternating the first character of the line selected from black character on white
background with a black block.) Pressing the FN key allows the selected function to be modified.
Exiting back to the Main Screen is accomplished by selecting EXIT using the UP or DN keys and
pressing the FN key or momentarily pressing the PWR key.
Key
Action
FN
Displays Main Menu Level 1 screen; selects the highlighted feature
DN Scrolls to next item on the menu screen
UP
Scrolls to previous item on the menu screen
PWR Momentarily pressing exits to Main Screen
Line 1
End of MSGS
Line 2
Line 3
Press FN or
Line 4
DN to exit
Note that this menu wraps around, going from Exit to Setup when scrolling UP, and from Setup to Exit
when scrolling DN.
Line 1
Exit
Line 2
Volume #
Line 3
Diag
Line 4
Split
Update
Beep
Audio
ID Fltr
RF Pwr
Msg
Export
Msg
Delete
Setup (Menu Level
2 Entry)
First four items displayed. Highlight will initially be on the Volume
selection. Highlight is always on Line 2.
Additional items to be displayed using UP or DN keys
PB007326 Rev E
Page 7 of 24
