Total number of messages currently stored in receiver is displayed on line
1.
Line 1
xxx Messages
Line 2
xxx Selected
Line 3
UP/DN Select
Line 4
FN to Begin
Line 2 displays the number of messages selected to be exported. Exported
messages always start with the most recent message and go back in time
from that point.
The receiver stores the last 99 messages received in non-volatile memory. After connecting the
receiver via the AUX connector located on the top of the receiver to the desired device (printer or
computer), the user selects the number of messages to download using the UP/DN keys. Pressing and
holding the UP/DN key longer than 2 seconds will result in the number selected rolling at an increased
speed. After the quantity to be exported is selected, the FN key is pressed to begin the process. Press
the FN key to return to the Main Screen.
When exporting messages the following parameters define how the information is sent:
RS-232
9600 Baud
8 Bits
No Parity
1 Stop Bit
See Comm Port Data Description for a description of the information exported.
J. Msg Delete
Message Delete (Msg Delete) is used to clear the receiver’s memory of previously received messages.
This feature is accessed by selecting “Msg Delete” and pressing the FN key. The following display
appears:
Line 1
Msg Delete
Line 2
XXXX
Line 3
UP/DN Select
Line 4
FN Accepts
The three choices are to delete “ALL” stored messages, “NONE” or only
the “LAST” message received.
Following selection, pressing the FN key will execute the command and return the user to the Main
Screen.
K. Setup
The Setup selection provides the path to the next menu level. This is accomplished by highlighting
“Setup” and pressing the FN key. The next screen appearing will be the Menu Level 2 Screen.
PB007326 Rev E
Page 10 of 24
