TS351-MDX Hotline Telephone
Programming and installation manual Revision 1.10
Telongo LLC.
Installation
The TS351-MDX only works on standard analog telephone lines. Do not install the telephone on digital
type telephone systems. The TS351-MDX is telephone line powered and has non-volatile memory so it
will not lose its program when unplugged from the telephone line.
Program register quick reference
Register
Register description
Valid entries
Default data
01
Hotline dial number
1234567890*,#1,#2
empty
11
Pulse digit handler
0-3
0
12
Off hook dial delay in milliseconds
1-3000
750
13
Restrict calls
0-1
0
14
DTMF on time in milliseconds
50-500
100
15
DTMF off time in milliseconds
50-500
100
16
On hook timing in milliseconds
150-1000
800
17
Off hook timing in milliseconds
100-2000
100
70
Program password
12345678908*,#1
#0*
88
Restore default settings
99
Exit programming
Things you will need to program the phone
Before programming the telephone you will need to
have another telephone with a keypad
to program
the TS351-MDX.
Programming steps
1.
Plug the telephone into the wall jack and make sure the handset is hung up.
2.
Take the other telephone with the key pad and call the line the TS351-MDX is connected to.
3.
When the TS351 rings, answer it and leave the handset offhook.
4.
Using the other telephone with the keypad dial #0*, you will hear one beep.
You are now in program mode and can enter any valid program register. If you enter the
password incorrectly you will have to repeat steps 2 and 3. To exit program mode dial 99 wait
for beep and hang up. At any time you here 4 beeps this means a program entry was incorrect.
