Telnova Technology Co.,Ltd
7
Note: If this module is intended for use in a portable device, you are responsible for separate approval to satisfy
the SAR requirements of FCC Part 2.1093.
Please be noticed following information and instructions should be placed in the end-user’s operating
manual
The
F6088 Module has been granted as limited modular approval for BLUETOOTH SPEAKER. F6088 Module
must be installed in the designated host as specified in this manual.
1. Separate approval is required for all other operating configurations, including portable configurations with
respect to 2.1093 and different antenna configurations.
2. The F6088 Module and its antenna must not be co-located or operating in conjunction with any other transmitter
or antenna within a host device. This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment.
3.A label must be affixed to the outside of the end product into which the F6088 Module is incorporated, with a
statement similar to the following: For F6088: This device contains FCC ID: WY9-F6088.
4. The module shall be in non-detachable construction protection into the finished products, so that the end-user
has to destroy the module while remove or install it.
5. This module is to be installed only in mobile or fixed applications. According to FCC part 2.1091(b) definition
of mobile and fixed devices is:.
Mobile device:
A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to
generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained
between the transmitter
’
s radiating structure(s) and the body of the user or nearby persons. In this context, the
term ‘‘fixed location’’ means that the device is phys
ically secure
d at one location and is not able to be easily
moved to another location.
Portable device:
For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the
radiating structure(s) of the device is/are within 20 centimeters of the body of the user.
6. Separate approval is required for all other operating configurations, including portable configurations with
respect to FCC Part 2.1093 and different antenna configurations.
7. A certified modular has the option to use a permanently affixed label, or an electronic label. For a permanently
affixed label, the module must be labelled with an FCC ID: WY9-F6088. The OEM manual must provide clear
instructions explaining to the OEM the labelling requirements, options and OEM user manual instructions that
are required.
For a host using a this FCC certified modular with a standard fixed label, if (1) the module’s FCC ID is not
visible when installed in the host, or (2) if the host is marketed so that end users do not have straightforward
commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an
additional permanent label referring to the enclosed module: “Contains Transmitter Module FCC ID:
WY9-F6088” or “Contains FCC ID: WY9-F6088” must be used. The host OEM user manual must also contain
clear instructions on how end users can find and/or access the module and the FCC ID.
8. Host product is required to comply with all applicable FCC equipment authorizations regulations,
requirements and equipment functions not associated with the transmitter module portion, compliance must be
