2
9 Microphone for phone calls
Wearing the headset
With its big ear pads and the retractable headband, the headset is
comfortable to wear. Please adjust the headband extension for your best
comfort. For correct sound distribution, please note that the headset is
marked with “R” for right, and “L” for left. Please wear it accordingly.
Charging the headset
Before use the first time, the headset must be fully charged. This will take
about 2 hours.
Connect the included USB-cable to a live USB outlet and into the
headset. The red LED indicates charging. When light goes out, charging is
completed.
Pairing the headset for the first time
The headset may be paired with a Bluetooth transmitting device with
A2DP profile of your choice. Do this:
- First you should set this BH-X headset in pairing mode by pressing the
ON/OFF/Pairing button for 6 - 8 seconds or until the red and blue lights
are alternately quickly flashing.
- Then, set the Bluetooth transmitting device into “Searching Pairing
Mode”. (See User Guide for instructions).
NOTE: it is recommended to do the pairing in this sequence.
- Release the button.
The headset will now pair with the transmitting device and will be ready
for use. This is indicated by the LED flashing blue every once or twice
every 8 seconds.
NOTE:
If PIN is requested, type 0000.
NOTE:
If pairing is not made within 2 minutes, the headset will go into
standby mode.