6
Installation
Connect the drain hose to a drain duct (with internal
diameter of at least 4 cm.) or place it for drainage into
a sink or a tub, ensuring that there are no kinks or
bends. The free end must be at a height of between
80 and 100 cm. Should it be necessary to fix the end
of the hose at a height of less than 80 cm from the
floor, the hose must be fixed in the appropriate hook
on the upper part of the back panel (Fig.4) or use the
supplied support to fix the drain hose.(Fig.5)
C onnection of
the Drain Hos e
Fig.4
Fig.5
Insert stainless steel screen washers into end of each
supply hose and attach that end of supply hose to
your 3/4" water tap spigot.Be sure that you match up
cold water to "C" and hot to "H".Note:Home Centers
also have"Y" connectors and "Couplings" which
enable you to connect the machine to your sinks
faucet.
C onnecting
WaterS upply
Maintenance: five simple
precautions for this machine
15
Your machine is designed to last without complicated
maintenance.
All the same, we would ask you to take care of a few small
matters. If you follow these four simple rules, we are sure
that the washing machine will stay as your faithful friend
and helper for a long, long time.
1. Ensure that your machine was installed according to
the installation manual that comes with this booklet.
2. Avoid at all costs using solvents either to clean the
machine, or to do the wash. when clean the machine,
cut off the power.
3. Clean the detergent dispenser every so often. This is
very simple and should be done with water. Your
machine has an extractable dispenser to make it even
easier. Just pull it upwards and out.
4. If it is long time no use, you'd better cut off the power,
switch off the tap, and open the door to avoid
unpleasant smell.
5. Your washer is equipped with a self-cleaning pump. It
is therefore not necessary to carry out cleaning and
maintenance operations.
(see Fig.8)
Fig.8
s
f
-
