Subwoofer
9. Clam ports
Note: Please insert the
speaker cable (included)
into the clam ports by the
anode and the cathode.
Power ON/OFF / Bluetooth
®
set up:
Place the speaker next to your Bluetooth® enabled
device.
Press and hold the Power button. You will hear a tone
notification and the blue LED will flash quickly to
indicate pairing mode.
Using your Bluetooth audio device, select “Tellur
Hypnos” from the list of available Bluetooth devices.
A tone notification will be heard and the blue LED will
flash slowly to indicate pairing was successful.
Press and hold the Power button to turn off the
speaker.
Remote Control
1. Power on/Standby
2. Change the mode (Bluetooth/AUX in)
3. Skip back
4. Play/Pause
5. Skip forward
6. Unpair a Bluetooth device
7. Change the EQ settings
09
8. Mute/Unmute the sound
9. Volume down
10. Volume up
11. Install the remote batteries
Technical Information
• Speaker type: 2.1
• BT version: 4.2
• Working range: 10 meters
• Remote control: Yes
• Rated power: 48W RMS (12W x 2 + 24W)
• Frequency response: 65Hz - 20KHz
• Drivers size: 3" x 2 + 5" x 1
• Impedance: 4Ω
• Signal to Noise ratio (SNR): ≥78dB
• Power supply: AC 220V-240V - 50/60Hz to
DC 15V - 2A
• Device size: Soundbar 50 cm x 11.2 cm x 5.4 cm
Subwoofer 38.7 cm x 36.7 cm x 9.5 cm
