Instructions
1. The car phone holder can be installed on all flat
surfaces of the car or into most air vents.
a. Dashboard installation: Rotate the screw nut until it
is loose enough to allow the adhesive support to be
inserted into the back of the holder. Insert the
support, adjust it to the wanted position and then
firmly screw the nut. Remove the adhesive protective
film and place the phone holder on the dashboard.
NOTE:
The flat surface on which the support is to be
mounted on must be clean and dry, otherwise, the use
effect of the base may not be ideal.
b. Air Vent installation: Rotate the screw nut until it is
loose enough to allow the car air vent clip to be
inserted into the back of the holder. Insert the clip,
adjust it to the wanted position and then firmly screw
the nut.
