- 4 -
1.
EQUIPMENT SUPPLIED
One Tanzanite 130 Phone
One Tanzanite 130 Handset
One Line cord
One Handset Curly Cord
2 x Keys - Keylock
Comprehensive User Guide
2.
INSTALLING THE TELEPHONE
To connect the telephone line
Plug one end of the line cord into the LINE jack on the telephone and the other end into
the wall socket (you will hear a click when the plug is inserted correctly).
If required connect other equipment to the DATA jack, e.g. modem.
You will hear dial tone if the telephone is connected correctly. If you do not hear dial
tone, check that the telephone plug is inserted correctly.
Depress and release the cradle switch a few times and press any keypad button between 0
and 9. If dial tone disappears, the telephone will operate on your type of exchange. If the
dial tone does not disappear then check the dial mode is set to TONE.
3.
SETTING THE DIAL MODE
The dial mode can be set by using the switch on the right side of the telephone.
Set the switch to Tone for use in South Africa.
•
Lift the handset
•
Listen for dial tone
•
Dial any number
If the dial tone disappears, you can leave your telephone set to Tone mode. If
the dial tone remains then change the switch position back to pulse mode
.
4.
SETTING THE RINGER VOLUME CONTROL
The ringer volume control has three settings
Low, Medium and High and can be set using
the slider switch on the right side of the
telephone base. Set the switch to the volume
level required.
Telephone Plug
Lift the handset Listen for dial tone
Wall Socket
TONE PULSE
TONE PULSE
