TY Instructions
5
3/20/12
For the new $2
You will need (5) x new $2 coins & (5) x old $2 coins and (1) TellerCup to complete this task.
1.
While in the count screen, press the
MENU
key. This takes you to the “
Menu
” screen.
2.
Ensure ‘
Options’
is highlighted and press the
ENTER
key.
This takes you to the ‘
Options’
screen.
3.
Using the
BILLS
key, select ’
Supervisor’
and press
ENTER
.
4.
This takes you
to the ’
PIN Number’
screen, press the following keys in the order shown below:
ON-OFF ENTER $ ENTER.
This takes you to the ’
Supervisor’
screen.
5.
Ensure
’Setup/Calibrate’
is highlighted and press
ENTER.
6.
Using the
BILLS
key scroll and highlight ’
COINS’
and press
ENTER.
You will now be in the screen entitled “
Press WRAP for Setup
”.
7.
Using the
BILLS
key scroll and highlight
‘$2’
.
8.
With
’$2
’ highlighted press the
WRAP
key.
This takes you to
‘Calibrate Coins’
screen.
9.
Now press the
ENTER
key.
10.
The TY will now display
‘
Put container on hod’
.
Place an empty TellerCup on to the hod.
11.
The TY will now display
‘
Put 10 Coins on hod and press ENTER’
. Place the
(5) new $2 & (5) old $2
into the TellerCup on the hod, and then press
ENTER
.
12. The screen will now display
‘
Add another 5 to 10’
. Instead remove the TellerCup from the hod.
13. Use the
BILLS
key to scroll and highlight
‘Save new weight’
and then press
ENTER.
14. Press
END
repeatedly to return to the Count screen. Your TY is now setup for the $2.
Note: It will now be necessary to count $2 coins loose by adding approximately 14 coins at a
time to the TellerCup. It is no longer possible to check Full Rolls of $2 coins.
If you require assistance, please call the Tellermate Help Desk:
1-800-TELMATE
