4.
USB connection :
▪
Launch the
Pager4
programming software!
▪
Connect the module via USB A-B cable to the computer!
▪
Select the
USB
option in the
Connection type
submenu!
▪
Enter the Connection password then push the button!
PIN-code, APN and Cloud:
After a successful USB connection, select the
General
submenu of the
Device Settings
menu. Here, in the SIM section, you can set the SIM
card’s PIN code and the APN specifi ed by your provider.
In the
Cloud server
section enter the server details and set the
Cloud usage.
Default server url:
54.75.242.103
Default server port:
2020
If the
Cloud usage
option is enabled, the device can be accessed at any
time via the cloud server. Otherwise it will only connect upon request
sent by SMS to the phone number of the SIM card:
*
CONNECT,PWD=
device password#
(e.g.
*CONNECT,PWD=1234#
)
After a successful connection is established, the device sends a re-
sponse SMS, which contains the server data and th
Device ID.
Device ID:
The
Device ID,
which is necessary for remote connection can be located
in the
Status monitoring
submenu of the
Device status
menu.
Cloud connection
:
▪
Launch the Pager4 programming software!
▪
Select the
Cloud
option in the
Connection type
submenu!
▪
Enter the server details and the
Device ID!
▪
Enter the Connection password then push the
button.
For further connection options, see the
Installation and User Manual
of
Pager4.
-> Chapter 4 of the Installation and User Manual
