47
5.2.5 Inputs
In this menu you can configure the properties and options of the dry contact inputs.
Available options:
Reading the settings from the device:
To read the settings from the device, click on the “
Read
” button. This will read all
settings in all menus.
Writing the settings into the device:
After changing the settings or entering new settings, in order to take effect, it is
necessary to write the new settings into the device by clicking on the “
Write
” button.
This will write the changes only, but all changes made in any menu.
Editing input settings:
To edit the settings of the selected input, click on the “
Edit
” button.
Please note that the settings have to be written in the device in order to be applied after
a change is made. For this, click on the “Write”
button.
