Compact GSM II Quick guide
9
Configuring the temperature sensor
1. Connect the temperature sensor to input
IN1
as shown in the wiring diagram.
2. Enable the temperature sensor in the
Inputs
section.
3. Configure the desired low and high temperature thresholds in the
Temperature
section. When the temperature thresholds are reached,
temperature events are generated about which the device can send
notifications as configured in the event settings.
You can also request status information in SMS, which also includes the value
of the actual temperature measured. For this, send the
INFO?#
message to the
phone number of the SIM card installed in the device.
When using a temperature sensor, the
Normally open
input mode can still be
used at the same time with input
IN1
to send notifications upon triggering the
input, but taking into account that the device is unable to receive temperature
data from the sensor while the input is shorted (in an activated state). Therefore,
you can use these two functions together only with short alarm trigger signals.
When a temperature sensor is used, the
Normally closed
and the
Car alarm
adaptation
operating modes cannot be used on input
IN1
, otherwise
temperature sensing will not work.
Содержание Compact GSM II
Страница 3: ...Compact GSM II Quick guide 3 Wiring diagram Connecting the TELL easyTEMP Compact temperature sensor...
Страница 14: ...Compact GSM II Gyorstelep t si tmutat 14 Bek t si bra TELL easyTEMP Compact h m rs klet rz kel csatlakoztat sa...
Страница 25: ...25 Anschlussplan TELL easyTEMP Compact Temperatursensor anschlie en...
