For device version v8.00 (29.07.2021)
Gate Control BASE 1000
QUICK GUIDE
FOR INSTALLERS
Dear Customer!
Thank you for choosing our product. The full
Installation
and Application Manual
is available on our website at:
https://tell.hu/en/products/gsm-automation/gate-control-base
GENERAL OPERATION OF THE GATE CONTROL BASE:
The
Gate Control BASE
device was basically designed for control of electric
gates and barriers. However, it can be used to control other devices as well.
Controlling can be performed according to the configured control mode by
making a phone call to the number of the SIM card installed into the device.
For compatibility with most gate automation control boards, upon setup you can
choose out of 5 different control modes, the one which is appropriate for your
gate automation. When controlling the system by call, it uses caller identification
to identify the caller/user.
Controlling (opening/closing) is possible only from authorized phone numbers
registered in the device, or from any phone number, according to the
configuration:
if there are users registered with phone numbers in the user
list, only calls from these phone numbers can control the device. If there
are no users registered, calls from any phone number will control the
device. If you use output control mode No. 1, calls from a private (hidden)
number will control output OUT2 in any case.
The system supports up to 1000 users, for which different options and
permissions can be configured, such as role, 0-24 entry period, and access to
outputs (gates), depending on the output control mode chosen.
Users who are granted the
0-24 entry period
permission can control the system
anytime, while users who are not granted this permission can control the system
over the day only within the time interval configured in the
Permitted entry
period
section in the
General
device settings menu. If there are no users
registered in the device, the system can be controlled by anyone from any phone
number only within the configured permitted entry period.
