Telkom duoPlus 300WR, Руководство пользователя

Страница: 55 / 127

duoPlus 300WR User Manual
Page 55 of 127
the router using the current dynamic IP address. At
the end of the Lease Time, the lease is either
renewed or the DHCP server issues a new IP. The
amount of time is in units of seconds. The default
value is 3600 seconds (1 hour). The maximum value
is 999999 seconds
(About 278 hours).
Enable DHCP Relay In addition to the DHCP server feature, the router
supports the DHCP relay function. When the router is
configured as DHCP server, it assigns the IP
addresses to the LAN clients. When the gateway is
configured as DHCP relay, it is responsible for
forwarding the requests and responses negotiated
between the DHCP clients and the server.
Relay IP The IP address of the DHCP relay server.
Server and Relay Off When the DHCP server and relay functions are
turned off, the network administrator must carefully
configure the IP address, Subnet Mask, and DNS
settings of every host on your network. Do not assign
the same IP address to more than one host. Also,
your router must reside on the same subnet as all the
other hosts.
Assign ISP DNS, SNTP
When you enable the DHCP server, the router dynamically assigns IP addresses to
computers in the local network. The router provides its own LAN IP address
(10.0.0.2) as both the gateway and the DNS server.
The router has a choice of advertising its own IP address (10.0.0.2) as the DNS
server or providing the DNS that was received from the WAN. This can be
configured by enabling/disabling Assign ISP DNS SNTP on the LAN Group
Configuration page.
Note: ISP DNS, SNTP only applies when the DHCP server is enabled on the LAN Group
Configuration page.
LAN Clients
LAN Clients allows you to view and add computers in a LAN group. Each computer
either has a dynamic or static (manually-configured) IP address.