manualshive.com logo in svg

Telit Wireless Solutions WE866E4-P, Справочник команд AT

Поделиться
Скачать
Telit Wireless Solutions WE866E4-P Скачать руководство пользователя страница 29

WE866E4-P AT Commands Reference Guide

80572ST10887A Rev. 0.0

29

2018-02-16

PRELIMINAR

Y

6.4  System Settings

6.4.1  Open File

This command is used to open a specified file with options in the file name.

Command Syntax

AT+YFOP=<FIle Name>,<Options>

Parameter Description

Table 21, page 29

, describes the Open File parameters.

Response

Table 22, page 29

, describes the responses and remarks for Open File command.

Synchronous Response

Table 23, page 30

, describes the synchronous responses and remarks for Open File 

command.

Table 21   Open File Parameters

Parameters Mandatory/Optional

Value

Description

File Path

Mandatory

Value range: 

1-64

Format:

 String

Default value:

 

N/A

It specifies the file name along with the 
path.
Example:/sys/abc.txt

Options

Mandatory

Value range: 

0x0-0x2, 0x41, 
0x42, 0xC1, 0xC2, 
0x241, 0x242, 
0x441, 0x442, 
0x4C1, 0x4C2

Format:

 Hexa

Default value:

 

N/A

It specifies any of the following three 
options, namely:
Open for reading only.
Open for writing only.
Open for reading and writing.

Table 22   File Open Response

Responses

Remarks

OK

Success.

ERROR

If parameter is not valid.

Содержание WE866E4-P

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды