LN920 TLB Hardware User Guide
1VV0301735 Rev. 0
Page 11 of 33
2021-07-15
Not Subject to NDA
(2)
1.8V VAUX/PWRMON (PL601/PL606)
Figure 5: 1.8V VAUX/PWRMON
The Jumper PL601/PL606 allows to supply 1.8V I/O power to the Telit EVB.
Place jumpers on PL601 1-2 and PL606 1-2 as indicated in Table 3.
(3)
SCK_GPIO5 (PL216)
The Jumper PL216 allows to connect SCK_GPIO5 (M.2 pin 20) to general EVB.
Place jumpers on PL216 1-2 and PL606 1-2 as indicated in Table 3.
(4)
USB Type C (U303/PL301/PL302)
The Jumper PL301/PL302 allows to supply 3.3V power to the USB switch blockto
support USB 3.1 gen1 by using USB Type C connector. (U303)
Place jumpers on PL301 1-2 and PL302 1-2 as indicated in Table 3.
Figure 6: SCK_GPIO5 and USB Type C
Содержание LN920 TLB
Страница 1: ...LN920 TLB HW User Guide 1VV0301735 Rev 0 2021 07 15 Telit Technical Documentation...
Страница 33: ......
