Telit Wireless Solutions LE51-868S DemoUnit Скачать руководство пользователя страница 19

 
 

 

 

 

 

 

                           READ CAREFULLY 

 
Be sure the use of this product is allowed in the country and in the environment required. The 
use of this product may be dangerous and has to be avoided in the following areas: 

 

Where it can interfere with other electronic devices in environments such as hospitals, 
airports, aircrafts, etc. 

 

Where there is risk of explosion such as gasoline stations, oil refineries, etc. It is 
responsibility of the user to enforce the country regulation and the specific 
environment regulation. 

Do not disassemble the product; any mark of tampering will compromise the warranty 
validity. We recommend following the instructions of the hardware user guides for a correct 
wiring of the product. 
The product has to be supplied with a stabilized voltage source, Safety Extra Low Voltage, 
with no energy hazard. The wiring has to be conforming to the security and fire prevention 
regulations. The product has to be handled with care, avoiding any contact with the pins 
because electrostatic discharges may damage the product itself. 
The system integrator is responsible of the functioning of the final product; therefore, care has 
to be taken to the external components of the module, as well as of any project or installation 
issue, because the risk of disturbing external devices or having impact on the security. Should 
there be any doubt, please refer to the technical documentation and the regulations in force. 
When installed in final product, a fire protection enclosure must be provided. Every module 
has to be equipped with a proper antenna with specific characteristics. The antenna has to be 
installed with care in order to avoid any interference with other electronic devices and has to 
guarantee a minimum distance from the body (20 cm). 
 
The European Community provides some Directives for the electronic equipments 
introduced on the market. All the relevant information’s are available on the European 
Community website: 
 

http://ec.europa.eu/enterprise/sectors/rtte/documents/

 

 
The text of the Directive 99/05 regarding telecommunication equipments is available, 
while the applicable Directives (Low Voltage and EMC) are available at: 
 

http://ec.europa.eu/enterprise/sectors/electrical/

          

 

Содержание LE51-868S DemoUnit






















Отзывы: