Telit Wireless Solutions Jupiter SL869, Руководство пользователя

Страница: 11 / 25

SL869 SW User Guide
1VV0301002 Rev.6 – 2013-10-1
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 11 of 25
Mod. 0806 2011-07 Rev.2
3. Commands Description
The table below summarizes the set of commands for the SL869:
Command ID Description
$PSTMINITGPS Initialize GPS position and time
$PSTMINITTIME Initialize GPS time
$PSTMCLREPHS Clear all ephemeris data
$PSTMDUMPEPHEMS Dump ephemeris data
$PSTMEPH Load ephemeris data
$PSTMNMEAONOFF Toggle the NMEA output ON and OFF
$PSTMCOLD Perform a COLD start
$PSTMWARM Perform a WARM start
$PSTMHOT Perform a HOT start
$PSTMSRR Perform a system reset
$PSTMGPSRESET Reset the GPS engine
$PSTMGETSWVER Get the GNSS Library version
$PSTMSBASONOFF Toggle the SBAS feature ON and OFF
$PSTMSBASSAT Select the SBAS satellite PRN code
Unless otherwise noted in the following subsections, commands are echoed by the SL869
after the command is executed.