GE865-QUAD Product Description
80309ST10054A Rev.6 – 2013-09-05
Reproduction forbidden without Telit Communications S.p.A’s. written authorization - All Rights Reserved.
Page 29 of 38
6.
Conformity Assessment Issues
The Telit GE865-QUAD has been assessed in order to satisfy the essential requirements of
the R&TTE Directive 1999/05/EC (Radio Equipment & Telecommunications Terminal
Equipments) to demonstrate the conformity against the harmonized standards with the final
involvement of a Notified Body.
By using our certified module, the evaluation under Article 3.2 of the R&TTE is considerably
reduced, allowing significant savings in term of cost and time in the certification process of
the final product.
In all cases the assessment of the final product must be made against the Essential
requirements of the R&TTE Directive Articles 3.1(a) and (b), Safety and EMC respectively,
and any relevant Article 3.3 requirements.
This Product Description, the Hardware User Guide and Software User Guide contain all the
information you may need for developing a product meeting the R&TTE Directive.
Furthermore the GE865-QUAD module is FCC Approved as module to be installed in other
devices. This device is to be used only for fixed and mobile applications. If the final product
after integration is intended for portable use, a new application and FCC is required.
The GE865-QUAD is conforming to the following US Directives:
• Use of RF Spectrum. Standards: FCC 47 Part 24 (GSM 1900)
• EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
To meet the FCC's RF exposure rules and regulations:
0889
