Telit Wireless Solutions EZ10 Series Скачать руководство пользователя

Страница: 31 / 74

Telit EZ10-GPRS/-PCS

Product Description

80269ST10014a, Rev. 3 – 26/09/05

Reproduction forbidden without written authorization by Telit Communications S.p.A.

Page 31 of 74

3 Software Features

3.1 Enhanced EASY GPRS Extension

3.1.1 Overview

The EASY GPRS feature allows a user of the

Telit wireless modems

EZ10-GPRS and EZ10-

PCS with PYG Option

to contact a device in the Internet and establish with it a raw data flow over

the GPRS and Internet networks.

This feature can be seen as a way to obtain a "virtual" serial connection between the Application
Software on the Internet machine involved and the controller of the

Telit wireless modem

EZ10-

GPRS / EZ10-PCS with PYG Option

, regardless of all the software stacks underlying.

An example of the protocol stack involved in the devices is reported:

This particular implementation allows to the devices interfacing to the

Telit wireless modem

EZ10-GPRS / EZ10-PCS with PYG Option

the use of the GPRS and Internet packet service

without the need to have an internal TCP/IP stack since this function is embedded inside the
module.

The new

Enhanced version

of the EASY GPRS overcomes some of the known limitations of the

previous implementation and implements some new features such as:

Keep the GPRS context active even after the closing of a socket, allowing the application to
keep the same IP address;

Also Mobile terminated (incoming) connections can be made, now it is possible to receive
incoming TCP connection requests;

A new internal firewall has been implemented in order to guarantee a certain level of security
on internet applications.

Remote

Controller

Device

(Internet)

Local

Remote

Application

TCP/UDP

EASY

TCP/UDP

GPRS

Serial

Data

Line

Driver

Board

V.24

Telit

EZ10-GPRS

networks

Firewall

<<<---------------------------------- Virtual Serial link ---------------------------------->>>

network interworking

Содержание EZ10 Series











































































Результаты поиска

Содержание EZ10 Series

Отзывы:

Похожие инструкции для EZ10 Series

Бренды по названию

Популярные бренды

Telit Wireless Solutions EZ10 Series, Описание продукта

Результаты поиска

Содержание EZ10 Series

Отзывы:

Похожие инструкции для EZ10 Series

Бренды по названию

Популярные бренды