Bravo HW User Guide
1VV0301646 Rev. 1
Page
40
of
47
2020-03-23
Wake Switch
Figure 26 - ON/OFF Switch Circuit
The ON_OFF#/WAKE# pin can be controlled by the PB3 bush-button or by the
910_ON_OFF signal that is connected to ARD_910_ON_OFF or RPI_910_ON_OFF
signal coming from Arduino or Raspberry PI connected boards respectively.
For additional details, please refer to chapter
“Arduino Pin-outArduino Pin-out”or
Shutdown Switch
Figure 277 - SHUTDOWN Switch Circuit
The HW_SHUTDOWN# pin can be controlled by the PB4 bush-button or by the
910_SHDN signal that is connected to ARD_910_SHDN or RPI_910_SHDN signal
coming from Arduino or Raspberry PI connected boards respectively. For additional
details, please refer to chapter
“Arduino Pin-outArduino Pin-out”or “Raspberry PI Pin-Out”.
