TELIKOU
SPK-200 Two-Channel Speaker Station
7
2.
When connecting those non-
TELIKOU
main stations to
TELIKOU
main
station, must use Intercom Line Connector.
19 Connect To Switch with Channel A
To achieve Mic on the beltpacks can be turned off by RMK function. All the
TELIKOU main stations in the system must be connected by the Online connector
which is on the rear panel. And Connect To switch turns to ‘ONLINE’ position.
Otherwise, RMK switch can not function on those beltpacks which are connected
to Channel A.
If SPK-200 must be connected to Intercom Line on Channel A, Connect To switch
need turns to ‘INTERCOM LINE’ position. Otherwise SPK-200 can not work
properly. And RMK switch can not affect belt packs on Channel A.
20. Online Connector on Channel B
It is used for Online connection among TELIKOU working main stations.
The pinout of Online Connector is as follows:
Pin 1 --- Common (Shield)
Pin 2 --- Control Signal
Pin 3 --- Audio Signal
Notes: Connect To Switch (21) must be set correctly before use. Otherwise the
system will not work properly.
Notice:
1.
This connector only can be connected to
TELIKOU
main station. It is not
allowed to be connected with
Intercom Line Connector
(Intercom Line);
otherwise, the system will not work properly.
2.
When connecting those non-
TELIKOU
main stations to
TELIKOU
main
station, must use Intercom Line Connector.
21 Connect To Switch with Channel B
To achieve Mic on the beltpacks can be turned off by RMK function. All the
TELIKOU main stations in the system must be connected by the Online connector
which is on the rear panel. And Connect To switch turns to ‘ONLINE’ position.
Otherwise, RMK switch can not function on those beltpacks which are connected
