TELIKOU
MS-200 Two Channel Main Station
4
gooseneck panel microphone along with the speaker or not. Use one the following procedures
to correctly set the sidetone level controls.
A) Sidetone Adjustment Procedure for Gooseneck Microphone with Speaker turned
on:
1 Turn off the Party Line Link (A+B) switch.
2 Turn off all the microphones on sub-stations and belt packs.
3 Set Mic select switch to panel.
4 Turn the Level control for Channel B all the way down. Set the level control for Channel A to
a comfortable level.
5 Press the Channel A Talk button and speak into the microphone while turning the sidetone
null control slowly back and forth. There should be a point where your voice (and any
accompanying acoustic feedback) is the lowest. This is the null point.
6 Repeat this procedure for Channel B by turning the Channel A Level control down and
adjusting the Channel B controls.
B) Sidetone Adjustment Procedure for Headset:
1 Turn off the Party Line Link (A+B) switch.
2 Turn off all the microphones on sub-stations and belt packs.
3 Set Mic select switch to headset.
4 Turn the Level control for Channel B all the way down. Set the level control for Channel A to
a comfortable level.
5 Press the Channel A Talk button and speak into the microphone while turning the sidetone
null control slowly back and forth. There should be a point where your voice (and any
accompanying acoustic feedback) is the lowest. This is the null point.
6 Repeat this procedure for Channel B by turning the Channel A Level control down and
adjusting the Channel B controls.
C) System Sidetone Adjustment
1 Turn off all the microphones on sub-stations and belt packs.
2 Followed by A) and B), adjust sidetone for MS-200 main station.
3 Adjust sub-station and belt pack’s sidetone one by one to satisfied level.
15. Feed To LED
This LED lights when Program Feed To function is set to ON or INT.
16. Announcement LED (ANN.LED)
This LED lights when announcement switch is enabled.
