TELIKOU
IP-1X IP Interface
1
I. Instruction
Thank you for choosing TELIKOU intercom product. Before use, we recommend you read
through this manual to better understand the function of IP-1X. If you have any question
that does not addressed on this manual, please contact your dealer or call us. We are
standing by to assist you.
IP-1X is a IP interface for intercom system. It is generally used in pairs. IP-1X has one
10/100MB POE network connector. It can make your intercom audio signal sent through
your local area network. IP-1X also can be powered by 4-wire or 2-wire connector.
II. Basic operations
NET Connector
RJ-45 connector. 10/100MB POE connector.
Supports all the network switchers.
Mode Switcher
T1 and T2 can be set to another IP-1X interface IP address or IP-1X group.
If T1 is set to exactly IP-1X IP address.
When switch to T1, IP-1X will make a full duplex communication with its target.
If T1 is set to a IP-1X group.
When switch to T1, IP-1X will make a continuous single way broadcast to IP-1X group.
Same for T2.
Middle ANN space is blank.
