TELIKOU
FT-800 4-Wire Eight Channel Main Station v2.3
3
10. Power Switch and Power LED
Red LED will light when power supply switch is on.
11. Panel Speaker
Panel speaker on when panel microphone is selected.
12. ANN
Send the activated microphone signal to ANN. Out connector on the rear panel.
13. ANN LED
When ANN button is pressed, this light on.
14. ALL
When ALL button is pressed, microphone audio is sent to all the channels.
15. Listen LED
When channel switch is lift or pressed, this light on.
16. Program Listen Volume Control
Adjust program audio level which for the FT-800 panel speaker or headset.
17. Panel Mic Gain
Mic gain is used to adjust the panel microphone gain. It has preset for electret microphones
18. AC Power Input
Input Voltage : 90V-260V, Power : Less than 35VA
19. Tally In for 1 - 4 Channel
DB9F pin definition:
Pin 1 --- Green Tally signal to channel 1
Pin 2 --- Red Tally signal to channel 1
Pin 3 --- Green Tally signal to channel 2
Pin 4 --- Red Tally signal to channel 2
Pin 5 --- Green Tally signal to channel 3
