TELIKOU
BK-601 Belt Pack
z
Introduction
Thank you for choosing TELIKOU intercom product. BK-601 beltpack can work with any
TELIKOU Intercom standard main station, and it is suitable for TV station, communication
command center, outside broadcast van, show, project test field, and other applications
where communication is required.
This system adopts wired connection, and has following features, free of external emission
interference, stable and reliable performance, flexible configuration, full-duplex
communication, clear and loud communication sound, easy operation, and strong noise
resistance.
z
Quick start
1. Use appropriate 3-pin XLR line cable connecting the beltpack to a intercom main station. If
the beltpack is receiving the DC power, the Power LED will light up.
2. Turn volume control knob to the end anticlockwise, and plug in the headset.
3. Press Mic button and the green indicator above button will be ON, which indicating that the
microphone is turned on.
4. Adjust the sidetone control (use a small screwdriver and insert it into the hole next to the
belt-clip) and volume level, and ensure that the sound level for your own voice from the
earphone is adjusted to minimum.
5. Press the Call button to send a talk request.
6. After the completion of talk, press the Mic button again, the indicator will be Off, and the
microphone will be turned off.
z
Basic operation
1. Mic key
If you want to talk, press this button, the Mic LED (5) light, that indicate the microphone is
turned on, and the sound from the microphone will be sent to the intercom line. This button
controls an internal flip circuit. When it is pressed once, the circuit will be turned on, and the
Mic LED indicator will be ON; when it is pressed again, the circuit will be turned off, and the
Mic LED will be OFF. When the connection between BK-601 and any TELIKOU Intercom main
station is established, the Remote-Mic-Kill button of the main station can turn off the
microphone of the BK-601 remotely.
2. Call key
Pressing down this button will send a call signal to the intercom system, and the LED indicator
1