11
Do not touch the GPS antenna in order to avoid contamination of the
receiver which may lead to a reduction of receiving quality (should you be
forced to clean the pad sometime, please do so using pure alcohol).
3.4
Connecting the Battery
The device is delivered by Telic GmbH with the internal battery disconnected from the electronic
PCB. Plug the battery inside the PCB connector as shown in Figure 6 and check that the LEDs starts
blinking.
Figure 6: Connecting the Battery cable
3.5
Switching the device ON of OFF
Telic delivers the devices switched-OFF.
To switch on the device:
push the small push button on the PCB until the green LED of the left
GSM-indicator starts to light-up.
To switch-off the device:
open the device and push the button twice in quick succession.
Figure 7: Switching the device on and off (Example: Endurance Primary)