Telian FWT-8000, Руководство пользователя

Страница: 11 / 36

11/33
l
Press the END key
END
monentarily to erase all the digits in
the display.
ü ü
To cause an on-hook condition after or during the dialing pro-
cedure just press the END key END .
!
The display panel has 15 digits capability, however
numbers containing up to 32 digits may be entered,
therefore only the last 15 digits dialed will remain in
the display.
Refer to the part in this section entitled “Reviewing the
Preceding Digits”
Receiving Calls
The cellular phone features both audio and visual signals to indicate an
incoming call.
The telephone will both ring and the word “CALL”will flash
repeatedly in the display panel.
ü ü
To answer an incoming call when the handset is resting in it’s
cradle, simply lift the receiver. The ringing will stop and the
IN USE indicator IN USE will appear in the display panel.
ü ü
To answer an incoming call when the handset is removed
from It’s cradle, press any key except the , or the END
key END . IN USE will light and you may proceed with the
call as usual.
ü ü
To hang up the phone after or during a conversation, press
the END key END , or simply replace the handset in it’s
cradle.
!
If calls go unanswered the word “missed” and the number
of unanswered calls will appear and remain in the
display until a call is originated.If calls go unanswered
the word “CALL” and the number of unanswered calls
will appear and remain in the display until the display
panel is cleared .
Silent Incoming Calls
If Silent Alert feature is set, a single beep and a flashing “CALL”
message on the display will alert you of an incoming call.
Once you have switched to silent alert, the phone stays in that
mode until you deactivate it.
ü ü
To activate this mode, press “FNC”,”8”.